Detailed Product Description

Specifications

Compliant Standards
DIN 40742.

Main Applications
---communication and signal systems such as telecommunication,China mobile and railway etc.
---UPS and emergency illumination etc.
---vessels and maritime affairs

Products Characteristics
 The battery electrolyte contains fumed silica and there is no flow,no leakage or no gradation of sulfuric acid .There is no risk of leakage during theutilization and transportation, and it is safe and reliable.

 The gel electrolyte is in dilute sol state when being injected.Excessive electrolyte can fill in all the space inside battery. Undercircumstance of high-temperature and overcharge, the battery will not dry out. The gel battery has large heat capacity and good radiationperformance. It is not easy to appear thermal runaway. The battery canwork under severe environment.

 The positive plate is tubular plate, which can effectively prevent the active materials from falling off. The positive plate skeleton is made of Pb-Ca alloy through die cast, and the thin andcompact crystal grains of alloy ensure good performance of corrosionproof. The negative plate is pasted plate, and the grid is in radialstructure, which is favorable for improving the utilization rate ofactive materials and is favorable for discharging at large current.Pb-Ca alloy is adopted and the voltage of hydrogen evolution is high.Unique lead paste formula enables perfect recovery performance ofbattery recharging after deep discharging. The battery has strong cycleand duration performance, sufficient capacity and long life.

 Adopt PVC-SiO2 separator, which is special for gel battery with tinyholes. The separator has high porosity and low resistance, and theinternal resistance of battery is low.

 Adopt imported safety valve. The open and close valve has constantpressure and the reliability is high, which can prevent case swelling,breaking and electrolyte dry out.

 The ABS case and lids of the battery is sealed with resin importedfrom Germany, so that to ensure no-leakage and to prevent air leakage.

The terminal is compounding type with inlaid lead copper core. It isprocessed through die cast and is sealed with imported resin and byimported special equipment. Due to its unique sealed structure ofterminal, the seal between case and lid of battery and metal batteryterminal is not the direct agglutination between sealant and metalsurface; instead, it is the agglutination with the protective sleeve oforganic materials and terminal, which makes the seal reliable.

The closed connection soft thread of terminal post caneffectively prevent short circuit due to accidents or avoid risk ofsuffering from electric shock.